Ironman Technology Co.,LTD
About us:
We specializes in automation parts and industrial controls, PLCS,DCS,Module/Board,Power supply,Controller, etc.We maintains an inventory of new and obsolete parts utilized in all areas of the manufacturing and industrial sectors.
Featured Brand:
● HONEYWELL ● AB ● OMRON ●SIEMENS ●SCHNEIDER
● ROSEMOUNT● ABB ● NOTIFIER ●MTL ● GE ●And many more !
Honeywell LSA2B Micro Switch 10 Amps Heavy Duty Limit Switch
Lead time:3-5 days
New with one year warranty
WIRING Use size #12AWG or smaller solid or stranded wire to connect to the pressure type connector terminals. Spades may be up to 0.312 inches wide, rings up to 0.312 inches dia. With spade or ring type connections, pre-insulated connectors or heat-shrinkable tubing should be used to provide insulation between terminals. The switch’s circuit diagram is shown on the nameplate. It is easier to wire the HDLS double-pole units by connecting lead wires to the terminals nearest the conduit opening first. A grounding screw is located in the housing near the conduit opening.
MICRO SWITCH™ HDLS switch units with an indicator light in the cover are furnished with lead wires from the light connected to the normally open male terminals (#3 and #4) unless otherwise specified. Wires can be unsoldered and reconnected to the normally closed male terminals or ordered connected to the normally closed terminals by using a modification code. Always connect these wires to the same set of terminals used for the load. Across the normally open male terminals (#3 and #4), the light will be on with switch not actuated. Across the normally closed terminals (#1 and #2) the light will be off.
Positioning the lever. The lever on rotary actuated units is adjustable through 360° around the shaft. Loosen the screw with a 9/64 inch hexagon key wrench, move lever to desired position, and securely tighten the screw until “teller tab” can no Ionger be moved by hand. Then tighten the screw another 1/8 to 1/4 turn to assure lever is tight on the shaft. Hexagon key wrenches are provided in adjusting tool set (part number LSZ4005). Adjustable Length Levers. A 9/64 hexagon key wrench is required to adjust length of adjustable levers. Top Roller Plunger. Position top roller plunger on desired roller plane by adjusting the head as explained in the Actuator Head section above.
The LSA2B is a double-pole double-throw (DPDT) 2NO-2NC heavy-duty Limit Switch with side rotary actuator and 0.75-inch 14NPT conduit. The MICRO SWITCH™ snap action heavy-duty limit switch comes with zinc die-cast housing, includes boss-and-socket head design for secure head-to-body retention, unique all-metal drive train for consistent operating characteristics even at high temperature (lasts longer without the need for frequent adjustment than drive trains with plastic parts,) self-lifting pressure plate terminals save wiring time, easily identified grounding terminal (inside) for compliance with OSHA and other regulatory agency standards.
- Field adjustable operating modes, for reduced inventory
- Convenience of on-the-spot adjustment instructions
- Explosion-proof
- Captive head and body screws
- Designed to withstand seismic shock
- Pre-leaded cable or pre-wired connector types
- Epoxy filled wash down
- -40°C Low temperature
Applications
Industrial, Maintenance & Repair
We have good price on AB PLC,Omron PLC and Honeywell C200,C300,model number such like TC/TK/MC/CC/511/512/513/514 and some FC series goods,
If you have other enquiry,pls feel free to let me know.
Product Tags:
|
|
LSA2B 10 Amps Heavy Duty Limit Switch Series Micro Honeywell 12 Months Warranty Images
|
